RSS265HO-44 10" Reference HO DVC Subwoofer 2 Ohm
Dual 4 ohm voice coils for many wiring options
8-14 days
Notify me when back in stock
Dayton Audio's 10" RSS265HO-44 High Output Reference Series subwoofer is purpose-built for moving lots of air, extreme power handling, extremely low distortion... and it does it all with an extremely small enclosure requirement! The minimum airspace optimization of this driver makes it perfect for car audio automotive applications and limited space home audio applications.
To minimize distortion, three copper short-circuit paths are built into the motor. This reduces second, third, and intermodulation distortion to levels only attained previously by expensive, exotic subwoofers. A side benefit is reduced energy storage and inductance, making the RSS265HO-44 a very musical subwoofer. In fact, frequency response remains very flat up to 500 Hz.
Additional features include: a heavy gauge black anodized aluminum cone that resists deformation from extreme air pressure levels found inside of small sealed enclosures, a fully ventilated motor for reduced power compression, a rigid cast aluminum frame for structural integrity, and a tough rubber surround that won't wear down over years of use. Dual 4-ohm voice coils allow for a wide array of wiring options.
As with all Dayton Audio subwoofers, you receive a full 5-year warranty. Designed and engineered in the U.S.A.
OPTIMUM CABINET SIZE *
Sealed Volume 0.55 ft.³
Sealed F3 46 Hz
Vented Volume 1.5 ft.³
Vented F3 22 Hz
- Enclosure volume/F3s based on BassBox "optimum" calculations
(848791000324)
• Extensively vented motor eliminates compression and allows quiet excursion
• Extra-thick black anodized aluminum cone for maximum rigidity
• Triple shorting-ring motor for ultra-low distortion
• Parameters optimized for small enclosures
• Highest quality materials throughout for long-lasting performance
| Speaker Series | Reference Series |
|---|---|
| Model Number | RSS265HO-44 |
| Color | Black |
| Unit of Measure | Each |
| UPC | 848791000324 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight (lbs.) | 17.2000 |
| Speaker Type | Subwoofer |
| Nominal Diameter | 10" |
| Power Handling (RMS) | 600 watts |
| Power Handling (max) | 1200 watts |
| Continuous Program Power | -- |
| Impedance | 2 ohms |
| Sensitivity | 90.5 dB @ 2.83V/1m |
| Frequency Response | 25 - 600 Hz |
| Voice Coil Diameter | 65.5 mm |
| Magnet Weight | -- |
| DC Resistance (Re) | 1.6 ohms |
| Voice Coil Inductance (Le) | 0.77 mH @ 1 kHz |
| Resonant Frequency (Fs) | 27.6 Hz |
| Mechanical Q (Qms) | 4.42 |
| Electromagnetic Q (Qes) | 0.50 |
| Total Q (Qts) | 0.45 |
| Diaphragm Mass Inc. Airload (Mms) | 161g |
| Moving Mass Of Diaphragm (Mmd) | -- |
| Mechanical Compliance of Suspension (Cms) | 0.21 mm/N |
| Surface Area Of Cone (Sd) | 352.3 cm² |
| Volume of Displacement (Vd) | 467.0 cm³ |
| BL Product (BL) | 9.39 Tm |
| Compliance Equivalent Volume (Vas) | 34.8 liters |
| Maximum Linear Excursion (Xmax) | 13.25 mm |
| Driver's Mechanical Losses (Rms) | -- |
| Cone / Diaphragm Material | Black Anodized Aluminum Cone |
| Entry / Exit Diameter | -- |
| Surround Material | Rubber |
| Voice Coil Wire Material | -- |
| Voice Coil Former | -- |
| Dual Voice Coil | Yes |
| Basket/Frame Material | Cast Aluminum |
| Magnet Material | -- |
| Overall Outside Diameter | 266 mm |
| Overall Depth | 136.5 mm |
| Baffle Cutout Diameter | 235 mm |
| # Mounting Holes | 6 |
| Mounting Hole Diameter | -- |
| Bolt Circle Diameter | -- |
| Product Weight | -- |
| SKU | 848791000324 |
| Model # | RSS265HO-44 |
| Barcode # | 848791000324 |
| Brand | Dayton Audio |
| Shipping Weight | 7.8020kg |
| Shipping Width | 0.305m |
| Shipping Height | 0.203m |
| Shipping Length | 0.305m |
| Shipping Cubic | 0.018878000m3 |
| Assembled Length | 0.305m |
| Assembled Height | 0.203m |
| Assembled Width | 0.305m |
Be The First To Review This Product!
Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.
