RSS265HF-4 10" Reference HF Subwoofer 4 Ohm
Extensively vented motor eliminates compression and allo
$499.00
In Stock
Notify me when back in stock
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
OPTIMUM CABINET SIZE *
Sealed Volume 0.53 ft.³
Sealed F3 51 Hz
Vented Volume 1.68 ft.³
Vented F3 27 Hz
- Enclosure volume/F3s based on BassBox "optimum" calculations
(844632006913)
• Extensively vented motor eliminates compression and allows quiet excursion
• Lightweight black anodized aluminum cone for rigidity and lower moving mass
• Suitable for sealed or vented enclosures
• Triple shorting ring motor for ultra-low distortion
• 2-layer coil for reduced back EMF
• Highest quality materials throughout for long-lasting performance
• Lightweight black anodized aluminum cone for rigidity and lower moving mass
• Suitable for sealed or vented enclosures
• Triple shorting ring motor for ultra-low distortion
• 2-layer coil for reduced back EMF
• Highest quality materials throughout for long-lasting performance
| Speaker Series | Reference Series |
|---|---|
| Model Number | RSS265HF-4 |
| Color | Black |
| Unit of Measure | Each |
| UPC | 844632006913 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight (lbs.) | 18.0000 |
| Speaker Type | Subwoofer |
| Nominal Diameter | 10" |
| Power Handling (RMS) | 350 watts |
| Power Handling (max) | 700 watts |
| Continuous Program Power | -- |
| Impedance | 4 ohms |
| Sensitivity | 87.8 dB @ 2.83V/1m |
| Frequency Response | 22 - 1,000 Hz |
| Voice Coil Diameter | 64 mm |
| Magnet Weight | 100 oz. |
| DC Resistance (Re) | 3.5 ohms |
| Voice Coil Inductance (Le) | 0.96 mH @ 1 kHz |
| Resonant Frequency (Fs) | 25.6 Hz |
| Mechanical Q (Qms) | 3.06 |
| Electromagnetic Q (Qes) | 0.53 |
| Total Q (Qts) | 0.45 |
| Diaphragm Mass Inc. Airload (Mms) | 120g |
| Moving Mass Of Diaphragm (Mmd) | -- |
| Mechanical Compliance of Suspension (Cms) | 0.32 mm/N |
| Surface Area Of Cone (Sd) | 356.3 cm² |
| Volume of Displacement (Vd) | 438.3 cm³ |
| BL Product (BL) | 11.43 Tm |
| Compliance Equivalent Volume (Vas) | 54 liters |
| Maximum Linear Excursion (Xmax) | 12.3 mm |
| Driver's Mechanical Losses (Rms) | -- |
| Cone / Diaphragm Material | Black Anodized Aluminum Cone |
| Entry / Exit Diameter | -- |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket/Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 266 mm |
| Overall Depth | 136.5 mm |
| Baffle Cutout Diameter | 235 mm |
| # Mounting Holes | 6 |
| Mounting Hole Diameter | -- |
| Bolt Circle Diameter | -- |
| Product Weight | -- |
| SKU | 844632006913 |
| Model # | RSS265HF-4 |
| Barcode # | 844632006913 |
| Brand | Dayton Audio |
| Shipping Weight | 8.5000kg |
| Shipping Width | 0.305m |
| Shipping Height | 0.197m |
| Shipping Length | 0.292m |
| Shipping Cubic | 0.017526000m3 |
| Assembled Length | 0.292m |
| Assembled Height | 0.197m |
| Assembled Width | 0.305m |
Be The First To Review This Product!
Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.
