DAEX25FHE-4 Framed High Efficiency 25mm Exciter
Small size;just under 2" diameter, about 7/8" high
Notify me when back in stock
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! For permanent inverted mounting (or when mounting on moving surfaces), four screw tabs are also provided to support the weight of the exciter. Two PCB solder points keep installation and wiring as compact as possible.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Adhesive dimensions: 27.6 mm (outside diameter), 21.8 mm (inside diameter)
(848791000980)
• Small size;just under 2" diameter, about 7/8" high
• Pre-applied 3M VHB adhesive for quick, durable installation
• Rare-earth neodymium motor and a proprietary voice coil
• 4 ohms impedance for use with small, Class D amplifiers
• 24 watt RMS power handling for high output
| Speaker Series | Exciters |
|---|---|
| Model Number | DAEX25FHE-4 |
| Color | Silver |
| Unit of Measure | Each |
| UPC | 848791000980 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight (lbs.) | 0.2500 |
| Speaker Type | Exciter |
| Power Handling (RMS) | 24 watts |
| Power Handling (max) | -- |
| Continuous Program Power | -- |
| Impedance | 4 ohms |
| Sensitivity | -- |
| Frequency Response | -- |
| Voice Coil Diameter | 25 mm |
| Magnet Weight | -- |
| DC Resistance (Re) | 4.3 ohms |
| Voice Coil Inductance (Le) | 0.10 mH @ 1 kHz |
| Resonant Frequency (Fs) | 224 Hz |
| Mechanical Q (Qms) | -- |
| Electromagnetic Q (Qes) | -- |
| Total Q (Qts) | 0.78 |
| Diaphragm Mass Inc. Airload (Mms) | 1.61 g |
| Moving Mass Of Diaphragm (Mmd) | -- |
| Mechanical Compliance of Suspension (Cms) | 0.0003 mm/N |
| Surface Area Of Cone (Sd) | -- |
| Volume of Displacement (Vd) | -- |
| BL Product (BL) | 3.63 Tm |
| Compliance Equivalent Volume (Vas) | -- |
| Maximum Linear Excursion (Xmax) | -- |
| Driver's Mechanical Losses (Rms) | -- |
| Entry / Exit Diameter | -- |
| Surround Material | -- |
| Voice Coil Wire Material | -- |
| Voice Coil Former | -- |
| Basket/Frame Material | -- |
| Magnet Material | -- |
| Overall Outside Diameter | 50.5 mm dia. |
| Overall Depth | 20.5 mm |
| Baffle Cutout Diameter | -- |
| Mounting Hole Diameter | -- |
| Bolt Circle Diameter | -- |
| Product Weight | -- |
| SKU | 848791000980 |
| Model # | DAEX25FHE-4 |
| Barcode # | 848791000980 |
| Brand | Dayton Audio |
| Shipping Weight | 0.1200kg |
| Shipping Width | 0.102m |
| Shipping Height | 0.051m |
| Shipping Length | 0.102m |
| Shipping Cubic | 0.000524000m3 |
| Assembled Length | 0.102m |
| Assembled Height | 0.051m |
| Assembled Width | 0.102m |
Be The First To Review This Product!
Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.
