RSS210HF-4 8" Reference HF Subwoofer 4 Ohm
Extensively vented motor eliminates compression and allo
$329.00
Availability:
8-14 days
8-14 days
Notify me when back in stock
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
OPTIMUM CABINET SIZE *
Sealed Volume 0.55 ft.³
Sealed F3 48 Hz
Vented Volume 1.76 ft.³
Vented F3 24 Hz
- Enclosure volume/F3s based on BassBox "optimum" calculations
(844632062308)
• Extensively vented motor eliminates compression and allows quiet excursion
• Lightweight black anodized aluminum cone for rigidity and lower moving mass
• Suitable for sealed or vented enclosures
• Triple shorting ring motor for ultra-low distortion
• 2-layer coil for reduced back EMF
• Highest quality materials throughout for long-lasting performance
• Lightweight black anodized aluminum cone for rigidity and lower moving mass
• Suitable for sealed or vented enclosures
• Triple shorting ring motor for ultra-low distortion
• 2-layer coil for reduced back EMF
• Highest quality materials throughout for long-lasting performance
| Speaker Series | Reference Series |
|---|---|
| Model Number | RSS210HF-4 |
| Color | Black |
| Unit of Measure | Each |
| UPC | 844632062308 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight (lbs.) | 8.8000 |
| Speaker Type | Subwoofer |
| Nominal Diameter | 8" |
| Power Handling (RMS) | 280 watts |
| Power Handling (max) | 560 watts |
| Continuous Program Power | -- |
| Impedance | 4 ohms |
| Sensitivity | 85.6 dB @ 2.83V/1m |
| Frequency Response | 27 - 1,000 Hz |
| Voice Coil Diameter | 51 mm |
| Magnet Weight | 50 oz. |
| DC Resistance (Re) | 3.1 ohms |
| Voice Coil Inductance (Le) | 0.7 mH @ 1 kHz |
| Resonant Frequency (Fs) | 29.6 Hz |
| Mechanical Q (Qms) | 3.25 |
| Electromagnetic Q (Qes) | 0.69 |
| Total Q (Qts) | 0.57 |
| Diaphragm Mass Inc. Airload (Mms) | 78.4g |
| Moving Mass Of Diaphragm (Mmd) | -- |
| Mechanical Compliance of Suspension (Cms) | 0.37 mm/N |
| Surface Area Of Cone (Sd) | 219.0 cm² |
| Volume of Displacement (Vd) | 197.1 cm³ |
| BL Product (BL) | 8.12 Tm |
| Compliance Equivalent Volume (Vas) | 23.7 liters |
| Maximum Linear Excursion (Xmax) | 9.0 mm |
| Driver's Mechanical Losses (Rms) | -- |
| Cone / Diaphragm Material | Black Anodized Aluminum Cone |
| Entry / Exit Diameter | -- |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket/Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 213 mm |
| Overall Depth | 124 mm |
| Baffle Cutout Diameter | 185 mm |
| # Mounting Holes | 6 |
| Mounting Hole Diameter | -- |
| Bolt Circle Diameter | -- |
| Product Weight | -- |
| SKU | 844632062308 |
| Model # | RSS210HF-4 |
| Barcode # | 844632062308 |
| Brand | Dayton Audio |
| Shipping Weight | 4.0400kg |
| Shipping Width | 0.248m |
| Shipping Height | 0.165m |
| Shipping Length | 0.248m |
| Shipping Cubic | 0.010126000m3 |
| Assembled Length | 0.248m |
| Assembled Height | 0.165m |
| Assembled Width | 0.248m |
Another great dayton driver
By: Mike on 27 September 2016Very, very good. Good power handling and very deep bass for its size.
(4)
